Our Work

Real parts, printed for real clients, right here in Cape Town.

Peacock Pair Wedding TopperVideo3 photos
Multi-Color PLA

Peacock Pair Wedding Topper

A dual-tone peacock pair, hand-finished with metallic gold accents, commissioned as a one-of-a-kind cake topper for a client's wedding. The facing, heart-shaped neck pose was designed specifically for the occasion.

Custom Animal-Head Tow Hitch Covers5 photos
PLA

Custom Animal-Head Tow Hitch Covers

Our most requested custom item: a replacement for the standard tow ball cap, sculpted into a dog breed (or whatever else a customer wants) instead. Every order is matched to the customer's own pet and fitted to their specific vehicle's hitch. Not every customer wants their own dog -- some just want something fierce, or a nod to their favourite sport, on the back of the car.

Dribuddi Leg Attachments (Re-engineered Replacement)3 photos
PETG

Dribuddi Leg Attachments (Re-engineered Replacement)

A customer's Dribuddi clothes dryer was out of action after the plastic bracket that holds a leg to the main unit cracked. No replacement was available, and the part is not a simple shape: an angled leg socket, a sloped rounded end, internal ribs and two screw-mounting tabs. We reverse-engineered it from the broken original, measuring the bracket and the aluminium leg with digital calipers and marked-up photos (overall size, 1.6 mm walls, socket angle, rib positions, screw holes), then modelled it as a fully parametric part in Onshape, so the fit, angle and size can be changed in seconds. Several printed versions were compared side by side with the original until one matched, and the final parts were printed in PETG with the socket sized for a snug push fit onto the leg. The replacement was made in a few days. It fits the original screw points and takes the existing leg, and we keep the CAD file on hand for repeat orders or similar models. Three were printed and fitted.

3D Printed Photo Jigsaw Puzzle2 photos
PLA

3D Printed Photo Jigsaw Puzzle

A custom lithophane-style image, printed flat and cut into interlocking jigsaw pieces -- a genuinely one-off gift built from a customer's own photo.

Wall-Mounted Succulent Planters3 photos
PETG

Wall-Mounted Succulent Planters

Small textured planters for succulents and aloe, printed in PETG and drilled into a concrete wall.

Sugar Skull Pen HolderVideo
Silk PLA

Sugar Skull Pen Holder

A calavera-style skull that doubles as a desk pen and brush holder, printed in a metallic gold finish. The floral and vine relief across the crown and jaw is modelled into the geometry and printed directly -- nothing is painted or applied afterwards.

NTT-Tech Elevator Emergency Dialer Enclosure2 Videos4 photos
PETG

NTT-Tech Elevator Emergency Dialer Enclosure

ThinkerPrint designs and manufactures the impact-resistant enclosure for NTT-Tech's 4G LTE Emergency Auto Dialer, a hands-free unit installed in elevators to connect passengers directly to a call centre over 4G VoLTE. It runs on backup battery power with voice announcements, and the 3-way variant covers the lift car, top of car, and pit from a single unit. It's ICASA-certified and SANS 50081-20 compliant. We produce these enclosures for NTT-Tech as an ongoing monthly production run, not a one-off job.

Weed-Eater Bump Feed Heads
Nylon

Weed-Eater Bump Feed Heads

Replacement bump feed parts produced for a landscaping company under an ongoing supply arrangement -- not a one-off fix, a repeat production run.

Questions We Get Asked

Can you make a custom part like the ones in your portfolio?

Yes. Send a 3D model, a photo next to a ruler, or a sketch with the key measurements. We design parts in-house and quote the design along with the print.

How long does a project take?

One-off parts usually take 2-3 days to print. Batch and production runs take 1-2 weeks depending on size and quantity. Quote requests are answered within 24 hours.

Where are you based, and do you deliver?

Our workshop is in Edgemead, Cape Town, open 06:00-18:00 every day. We deliver across South Africa via PUDO lockers.

How do I get a price?

Upload an STL to the instant quote for an online estimate, or send us the details of what you need. A person checks the model and confirms the final price within 24 hours.